Bot Updating Templated Files

adding pipeline logic, multi arch, and rebase to alpine 3.8

Dockerfile

@@ -1,4 +1,4 @@
-FROM lsiobase/alpine:3.7
+FROM lsiobase/alpine:3.8
 
 # set version label
 ARG BUILD_DATE
@@ -42,25 +42,12 @@ RUN \
 	LCDSUPPORT \
 	LEDSUPPORT \
 	READ_SDT_CHARSETS && \
-  echo "**** attempt to set number of cores available for make to use ****" && \
- set -ex && \
- CPU_CORES=$( < /proc/cpuinfo grep -c processor ) || echo "failed cpu look up" && \
- if echo $CPU_CORES | grep -E  -q '^[0-9]+$'; then \
-	: ;\
- if [ "$CPU_CORES" -gt 7 ]; then \
-	CPU_CORES=$(( CPU_CORES  - 3 )); \
- elif [ "$CPU_CORES" -gt 5 ]; then \
-	CPU_CORES=$(( CPU_CORES  - 2 )); \
- elif [ "$CPU_CORES" -gt 3 ]; then \
-	CPU_CORES=$(( CPU_CORES  - 1 )); fi \
- else CPU_CORES="1"; fi && \
- make -j $CPU_CORES \
+ make \
 	CONF_DIR=/config \
 	DEFAULT_PCSC_FLAGS="-I/usr/include/PCSC" \
 	NO_PLUS_TARGET=1 \
 	OSCAM_BIN=/usr/bin/oscam \
 	pcsc-libusb && \
- set +ex && \
  echo "**** fix broken permissions from pcscd install ****" && \
  chown root:root \
 	/usr/sbin/pcscd && \

Dockerfile.aarch64

@@ -0,0 +1,85 @@
+FROM lsiobase/alpine.arm64:3.8
+
+# Add qemu to build on x86_64 systems
+COPY qemu-aarch64-static /usr/bin
+
+# set version label
+ARG BUILD_DATE
+ARG VERSION
+LABEL build_version="Linuxserver.io version:- ${VERSION} Build-date:- ${BUILD_DATE}"
+LABEL maintainer="saarg"
+
+RUN \
+ echo "**** install build packages ****" && \
+ apk add --no-cache --virtual=build-dependencies \
+	bzr \
+	curl \
+	gcc \
+	g++ \
+	libusb-dev \
+	linux-headers \
+	make \
+	libressl-dev \
+	pcsc-lite-dev \
+	tar && \
+ echo "**** install runtime packages ****" && \
+ apk add --no-cache \
+	ccid \
+	libcrypto1.0 \
+	libssl1.0 \
+	libusb \
+	pcsc-lite \
+	pcsc-lite-libs && \
+ echo "**** compile oscam ****" && \
+ bzr branch lp:oscam /tmp/oscam-svn && \
+ cd /tmp/oscam-svn && \
+ ./config.sh \
+	--enable all \
+	--disable \
+	CARDREADER_DB2COM \
+	CARDREADER_INTERNAL \
+	CARDREADER_STINGER \
+	CARDREADER_STAPI \
+	CARDREADER_STAPI5 \
+	IPV6SUPPORT \
+	LCDSUPPORT \
+	LEDSUPPORT \
+	READ_SDT_CHARSETS && \
+ make \
+	CONF_DIR=/config \
+	DEFAULT_PCSC_FLAGS="-I/usr/include/PCSC" \
+	NO_PLUS_TARGET=1 \
+	OSCAM_BIN=/usr/bin/oscam \
+	pcsc-libusb && \
+ echo "**** fix broken permissions from pcscd install ****" && \
+ chown root:root \
+	/usr/sbin/pcscd && \
+ chmod 755 \
+	/usr/sbin/pcscd && \
+ echo "**** install PCSC drivers ****" && \
+ mkdir -p \
+	/tmp/omnikey && \
+ curl -o \
+ /tmp/omnikey.tar.gz -L \
+	https://www.hidglobal.com/sites/default/files/drivers/ifdokccid_linux_x86_64-v4.2.8.tar.gz && \
+ tar xzf \
+ /tmp/omnikey.tar.gz -C \
+	/tmp/omnikey --strip-components=2 && \
+ cd /tmp/omnikey && \
+ ./install && \
+ echo "**** fix group for card readers and add abc to dialout group ****" && \
+ groupmod -g 24 cron && \
+ groupmod -g 16 dialout && \
+ usermod -a -G 16 abc && \
+ echo "**** cleanup ****" && \
+ apk del --purge \
+	build-dependencies && \
+ rm -rf \
+	/tmp/*
+
+# copy local files
+COPY root/ /
+
+# Ports and volumes
+EXPOSE 8888
+VOLUME /config

Dockerfile.armhf

@@ -0,0 +1,85 @@
+FROM lsiobase/alpine.armhf:3.8
+
+# Add qemu to build on x86_64 systems
+COPY qemu-arm-static /usr/bin
+
+# set version label
+ARG BUILD_DATE
+ARG VERSION
+LABEL build_version="Linuxserver.io version:- ${VERSION} Build-date:- ${BUILD_DATE}"
+LABEL maintainer="saarg"
+
+RUN \
+ echo "**** install build packages ****" && \
+ apk add --no-cache --virtual=build-dependencies \
+	bzr \
+	curl \
+	gcc \
+	g++ \
+	libusb-dev \
+	linux-headers \
+	make \
+	libressl-dev \
+	pcsc-lite-dev \
+	tar && \
+ echo "**** install runtime packages ****" && \
+ apk add --no-cache \
+	ccid \
+	libcrypto1.0 \
+	libssl1.0 \
+	libusb \
+	pcsc-lite \
+	pcsc-lite-libs && \
+ echo "**** compile oscam ****" && \
+ bzr branch lp:oscam /tmp/oscam-svn && \
+ cd /tmp/oscam-svn && \
+ ./config.sh \
+	--enable all \
+	--disable \
+	CARDREADER_DB2COM \
+	CARDREADER_INTERNAL \
+	CARDREADER_STINGER \
+	CARDREADER_STAPI \
+	CARDREADER_STAPI5 \
+	IPV6SUPPORT \
+	LCDSUPPORT \
+	LEDSUPPORT \
+	READ_SDT_CHARSETS && \
+ make \
+	CONF_DIR=/config \
+	DEFAULT_PCSC_FLAGS="-I/usr/include/PCSC" \
+	NO_PLUS_TARGET=1 \
+	OSCAM_BIN=/usr/bin/oscam \
+	pcsc-libusb && \
+ echo "**** fix broken permissions from pcscd install ****" && \
+ chown root:root \
+	/usr/sbin/pcscd && \
+ chmod 755 \
+	/usr/sbin/pcscd && \
+ echo "**** install PCSC drivers ****" && \
+ mkdir -p \
+	/tmp/omnikey && \
+ curl -o \
+ /tmp/omnikey.tar.gz -L \
+	https://www.hidglobal.com/sites/default/files/drivers/ifdokccid_linux_x86_64-v4.2.8.tar.gz && \
+ tar xzf \
+ /tmp/omnikey.tar.gz -C \
+	/tmp/omnikey --strip-components=2 && \
+ cd /tmp/omnikey && \
+ ./install && \
+ echo "**** fix group for card readers and add abc to dialout group ****" && \
+ groupmod -g 24 cron && \
+ groupmod -g 16 dialout && \
+ usermod -a -G 16 abc && \
+ echo "**** cleanup ****" && \
+ apk del --purge \
+	build-dependencies && \
+ rm -rf \
+	/tmp/*
+
+# copy local files
+COPY root/ /
+
+# Ports and volumes
+EXPOSE 8888
+VOLUME /config

Jenkinsfile

@@ -0,0 +1,631 @@
+pipeline {
+  agent {
+    label 'X86-64-MULTI'
+  }
+  // Input to determine if this is a package check
+  parameters {
+     string(defaultValue: 'false', description: 'package check run', name: 'PACKAGE_CHECK')
+  }
+  // Configuration for the variables used for this specific repo
+  environment {
+    BUILDS_DISCORD=credentials('build_webhook_url')
+    GITHUB_TOKEN=credentials('498b4638-2d02-4ce5-832d-8a57d01d97ab')
+    BUILD_VERSION_ARG = 'OSCAM_VERSION'
+    LS_USER = 'linuxserver'
+    LS_REPO = 'docker-oscam'
+    CONTAINER_NAME = 'oscam'
+    DOCKERHUB_IMAGE = 'linuxserver/oscam'
+    DEV_DOCKERHUB_IMAGE = 'lsiodev/oscam'
+    PR_DOCKERHUB_IMAGE = 'lspipepr/oscam'
+    DIST_IMAGE = 'alpine'
+    MULTIARCH='true'
+    CI='true'
+    CI_WEB='true'
+    CI_PORT='8888'
+    CI_SSL='false'
+    CI_DELAY='120'
+    CI_DOCKERENV='TZ=US/Pacific'
+    CI_AUTH='user:password'
+    CI_WEBPATH=''
+  }
+  stages {
+    // Setup all the basic environment variables needed for the build
+    stage("Set ENV Variables base"){
+      steps{
+        script{
+          env.EXIT_STATUS = ''
+          env.LS_RELEASE = sh(
+            script: '''curl -s https://api.github.com/repos/${LS_USER}/${LS_REPO}/releases/latest | jq -r '. | .tag_name' ''',
+            returnStdout: true).trim()
+          env.LS_RELEASE_NOTES = sh(
+            script: '''cat readme-vars.yml | awk -F \\" '/date: "[0-9][0-9].[0-9][0-9].[0-9][0-9]:/ {print $4;exit;}' | sed -E ':a;N;$!ba;s/\\r{0,1}\\n/\\\\n/g' ''',
+            returnStdout: true).trim()
+          env.GITHUB_DATE = sh(
+            script: '''date '+%Y-%m-%dT%H:%M:%S%:z' ''',
+            returnStdout: true).trim()
+          env.COMMIT_SHA = sh(
+            script: '''git rev-parse HEAD''',
+            returnStdout: true).trim()
+          env.CODE_URL = 'https://github.com/' + env.LS_USER + '/' + env.LS_REPO + '/commit/' + env.GIT_COMMIT
+          env.DOCKERHUB_LINK = 'https://hub.docker.com/r/' + env.DOCKERHUB_IMAGE + '/tags/'
+          env.PULL_REQUEST = env.CHANGE_ID
+        }
+        script{
+          env.LS_RELEASE_NUMBER = sh(
+            script: '''echo ${LS_RELEASE} |sed 's/^.*-ls//g' ''',
+            returnStdout: true).trim()
+        }
+        script{
+          env.LS_TAG_NUMBER = sh(
+            script: '''#! /bin/bash
+                       tagsha=$(git rev-list -n 1 ${LS_RELEASE} 2>/dev/null)
+                       if [ "${tagsha}" == "${COMMIT_SHA}" ]; then
+                         echo ${LS_RELEASE_NUMBER}
+                       elif [ -z "${GIT_COMMIT}" ]; then
+                         echo ${LS_RELEASE_NUMBER}
+                       else
+                         echo $((${LS_RELEASE_NUMBER} + 1))
+                       fi''',
+            returnStdout: true).trim()
+        }
+      }
+    }
+    /* #######################
+       Package Version Tagging
+       ####################### */
+    // Grab the current package versions in Git to determine package tag
+    stage("Set Package tag"){
+      steps{
+        script{
+          env.PACKAGE_TAG = sh(
+            script: '''#!/bin/bash
+                       if [ -e package_versions.txt ] ; then
+                         cat package_versions.txt | md5sum | cut -c1-8
+                       else
+                         echo none
+                       fi''',
+            returnStdout: true).trim()
+        }
+      }
+    }
+    /* ########################
+       External Release Tagging
+       ######################## */
+    // If this is an os release set release type to none to indicate no external release
+    stage("Set ENV os"){
+      steps{
+        script{
+          env.EXT_RELEASE = env.PACKAGE_TAG
+          env.RELEASE_LINK = 'none'
+        }
+      }
+    }
+    // Sanitize the release tag and strip illegal docker or github characters
+    stage("Sanitize tag"){
+      steps{
+        script{
+          env.EXT_RELEASE_CLEAN = sh(
+            script: '''echo ${EXT_RELEASE} | sed 's/[~,%@+;:/]//g' ''',
+            returnStdout: true).trim()
+        }
+      }
+    }
+    // If this is a master build use live docker endpoints
+    stage("Set ENV live build"){
+      when {
+        branch "master"
+        environment name: 'CHANGE_ID', value: ''
+      }
+      steps {
+        script{
+          env.IMAGE = env.DOCKERHUB_IMAGE
+          if (env.MULTIARCH == 'true') {
+            env.CI_TAGS = 'amd64-' + env.EXT_RELEASE_CLEAN + '-ls' + env.LS_TAG_NUMBER + '|arm32v6-' + env.EXT_RELEASE_CLEAN + '-ls' + env.LS_TAG_NUMBER + '|arm64v8-' + env.EXT_RELEASE_CLEAN + '-ls' + env.LS_TAG_NUMBER
+          } else {
+            env.CI_TAGS = env.EXT_RELEASE_CLEAN + '-ls' + env.LS_TAG_NUMBER
+          }
+          env.META_TAG = env.EXT_RELEASE_CLEAN + '-ls' + env.LS_TAG_NUMBER
+        }
+      }
+    }
+    // If this is a dev build use dev docker endpoints
+    stage("Set ENV dev build"){
+      when {
+        not {branch "master"}
+        environment name: 'CHANGE_ID', value: ''
+      }
+      steps {
+        script{
+          env.IMAGE = env.DEV_DOCKERHUB_IMAGE
+          if (env.MULTIARCH == 'true') {
+            env.CI_TAGS = 'amd64-' + env.EXT_RELEASE_CLEAN + '-pkg-' + env.PACKAGE_TAG + '-dev-' + env.COMMIT_SHA + '|arm32v6-' + env.EXT_RELEASE_CLEAN + '-pkg-' + env.PACKAGE_TAG + '-dev-' + env.COMMIT_SHA + '|arm64v8-' + env.EXT_RELEASE_CLEAN + '-pkg-' + env.PACKAGE_TAG + '-dev-' + env.COMMIT_SHA
+          } else {
+            env.CI_TAGS = env.EXT_RELEASE_CLEAN + '-pkg-' + env.PACKAGE_TAG + '-dev-' + env.COMMIT_SHA
+          }
+          env.META_TAG = env.EXT_RELEASE_CLEAN + '-pkg-' + env.PACKAGE_TAG + '-dev-' + env.COMMIT_SHA
+          env.DOCKERHUB_LINK = 'https://hub.docker.com/r/' + env.DEV_DOCKERHUB_IMAGE + '/tags/'
+        }
+      }
+    }
+    // If this is a pull request build use dev docker endpoints
+    stage("Set ENV PR build"){
+      when {
+        not {environment name: 'CHANGE_ID', value: ''}
+      }
+      steps {
+        script{
+          env.IMAGE = env.PR_DOCKERHUB_IMAGE
+          if (env.MULTIARCH == 'true') {
+            env.CI_TAGS = 'amd64-' + env.EXT_RELEASE_CLEAN + '-pkg-' + env.PACKAGE_TAG + '-pr-' + env.PULL_REQUEST + '|arm32v6-' + env.EXT_RELEASE_CLEAN + '-pkg-' + env.PACKAGE_TAG + '-pr-' + env.PULL_REQUEST + '|arm64v8-' + env.EXT_RELEASE_CLEAN + '-pkg-' + env.PACKAGE_TAG + '-pr-' + env.PULL_REQUEST
+          } else {
+            env.CI_TAGS = env.EXT_RELEASE_CLEAN + '-pkg-' + env.PACKAGE_TAG + '-pr-' + env.PULL_REQUEST
+          }
+          env.META_TAG = env.EXT_RELEASE_CLEAN + '-pkg-' + env.PACKAGE_TAG + '-pr-' + env.PULL_REQUEST
+          env.CODE_URL = 'https://github.com/' + env.LS_USER + '/' + env.LS_REPO + '/pull/' + env.PULL_REQUEST
+          env.DOCKERHUB_LINK = 'https://hub.docker.com/r/' + env.PR_DOCKERHUB_IMAGE + '/tags/'
+        }
+      }
+    }
+    // Use helper containers to render templated files
+    stage('Update-Templates') {
+      when {
+        branch "master"
+        environment name: 'CHANGE_ID', value: ''
+        expression {
+          env.CONTAINER_NAME != null
+        }
+      }
+      steps {
+        sh '''#! /bin/bash
+              set -e
+              TEMPDIR=$(mktemp -d)
+              docker pull linuxserver/jenkins-builder:latest
+              docker run --rm -e CONTAINER_NAME=${CONTAINER_NAME} -e GITHUB_BRANCH=master -v ${TEMPDIR}:/ansible/jenkins linuxserver/jenkins-builder:latest 
+              docker pull linuxserver/doc-builder:latest
+              docker run --rm -e CONTAINER_NAME=${CONTAINER_NAME} -e GITHUB_BRANCH=master -v ${TEMPDIR}:/ansible/readme linuxserver/doc-builder:latest
+              if [ "$(md5sum ${TEMPDIR}/${LS_REPO}/Jenkinsfile | awk '{ print $1 }')" != "$(md5sum Jenkinsfile | awk '{ print $1 }')" ] || [ "$(md5sum ${TEMPDIR}/${CONTAINER_NAME}/README.md | awk '{ print $1 }')" != "$(md5sum README.md | awk '{ print $1 }')" ]; then
+                mkdir -p ${TEMPDIR}/repo
+                git clone https://github.com/${LS_USER}/${LS_REPO}.git ${TEMPDIR}/repo/${LS_REPO}
+                git --git-dir ${TEMPDIR}/repo/${LS_REPO}/.git checkout -f master
+                cp ${TEMPDIR}/${CONTAINER_NAME}/README.md ${TEMPDIR}/repo/${LS_REPO}/
+                cp ${TEMPDIR}/docker-${CONTAINER_NAME}/Jenkinsfile ${TEMPDIR}/repo/${LS_REPO}/
+                cd ${TEMPDIR}/repo/${LS_REPO}/
+                git --git-dir ${TEMPDIR}/repo/${LS_REPO}/.git add Jenkinsfile README.md
+                git --git-dir ${TEMPDIR}/repo/${LS_REPO}/.git commit -m 'Bot Updating Templated Files'
+                git --git-dir ${TEMPDIR}/repo/${LS_REPO}/.git push https://LinuxServer-CI:${GITHUB_TOKEN}@github.com/${LS_USER}/${LS_REPO}.git --all
+                echo "true" > /tmp/${COMMIT_SHA}-${BUILD_NUMBER}
+              else
+                echo "false" > /tmp/${COMMIT_SHA}-${BUILD_NUMBER}
+              fi
+              mkdir -p ${TEMPDIR}/gitbook
+              git clone https://github.com/linuxserver/docker-documentation.git ${TEMPDIR}/gitbook/docker-documentation
+              if [ "${BRANCH_NAME}" = "master" ] && [ ! -f ${TEMPDIR}/gitbook/docker-documentation/images/docker-${CONTAINER_NAME}.md ] || [ "$(md5sum ${TEMPDIR}/gitbook/docker-documentation/images/docker-${CONTAINER_NAME}.md | awk '{ print $1 }')" != "$(md5sum ${TEMPDIR}/${CONTAINER_NAME}/docker-${CONTAINER_NAME}.md | awk '{ print $1 }')" ]; then
+                cp ${TEMPDIR}/${CONTAINER_NAME}/docker-${CONTAINER_NAME}.md ${TEMPDIR}/gitbook/docker-documentation/images/
+                cd ${TEMPDIR}/gitbook/docker-documentation/
+                git add images/docker-${CONTAINER_NAME}.md
+                git commit -m 'Bot Updating Templated Files'
+                git push https://LinuxServer-CI:${GITHUB_TOKEN}@github.com/linuxserver/docker-documentation.git --all
+              fi
+              rm -Rf ${TEMPDIR}'''
+        script{
+          env.FILES_UPDATED = sh(
+            script: '''cat /tmp/${COMMIT_SHA}-${BUILD_NUMBER}''',
+            returnStdout: true).trim()
+        }
+      }
+    }
+    // Exit the build if the Templated files were just updated
+    stage('Template-exit') {
+      when {
+        branch "master"
+        environment name: 'CHANGE_ID', value: ''
+        environment name: 'FILES_UPDATED', value: 'true'
+        expression {
+          env.CONTAINER_NAME != null
+        }
+      }
+      steps {
+        script{
+          env.EXIT_STATUS = 'ABORTED'
+        }
+      }
+    }
+    /* ###############
+       Build Container
+       ############### */
+    // Build Docker container for push to LS Repo
+    stage('Build-Single') {
+      when {
+        environment name: 'MULTIARCH', value: 'false'
+        environment name: 'EXIT_STATUS', value: ''
+      }
+      steps {
+        sh "docker build --no-cache -t ${IMAGE}:${META_TAG} \
+        --build-arg ${BUILD_VERSION_ARG}=${EXT_RELEASE} --build-arg VERSION=\"${META_TAG}\" --build-arg BUILD_DATE=${GITHUB_DATE} ."
+      }
+    }
+    // Build MultiArch Docker containers for push to LS Repo
+    stage('Build-Multi') {
+      when {
+        environment name: 'MULTIARCH', value: 'true'
+        environment name: 'EXIT_STATUS', value: ''
+      }
+      parallel {
+        stage('Build X86') {
+          steps {
+            sh "docker build --no-cache -t ${IMAGE}:amd64-${META_TAG} \
+            --build-arg ${BUILD_VERSION_ARG}=${EXT_RELEASE} --build-arg VERSION=\"${META_TAG}\" --build-arg BUILD_DATE=${GITHUB_DATE} ."
+          }
+        }
+        stage('Build ARMHF') {
+          agent {
+            label 'ARMHF'
+          }
+          steps {
+            withCredentials([
+              [
+                $class: 'UsernamePasswordMultiBinding',
+                credentialsId: '3f9ba4d5-100d-45b0-a3c4-633fd6061207',
+                usernameVariable: 'DOCKERUSER',
+                passwordVariable: 'DOCKERPASS'
+              ]
+            ]) {
+              echo 'Logging into DockerHub'
+              sh '''#! /bin/bash
+                 echo $DOCKERPASS | docker login -u $DOCKERUSER --password-stdin
+                 '''
+              sh "curl https://lsio-ci.ams3.digitaloceanspaces.com/qemu-arm-static -o qemu-arm-static"
+              sh "chmod +x qemu-*"
+              sh "docker build --no-cache -f Dockerfile.armhf -t ${IMAGE}:arm32v6-${META_TAG} \
+                           --build-arg ${BUILD_VERSION_ARG}=${EXT_RELEASE} --build-arg VERSION=\"${META_TAG}\" --build-arg BUILD_DATE=${GITHUB_DATE} ."
+              sh "docker tag ${IMAGE}:arm32v6-${META_TAG} lsiodev/buildcache:arm32v6-${COMMIT_SHA}-${BUILD_NUMBER}"
+              sh "docker push lsiodev/buildcache:arm32v6-${COMMIT_SHA}-${BUILD_NUMBER}"
+              sh '''docker rmi \
+                    ${IMAGE}:arm32v6-${META_TAG} \
+                    lsiodev/buildcache:arm32v6-${COMMIT_SHA}-${BUILD_NUMBER} '''
+            }
+          }
+        }
+        stage('Build ARM64') {
+          agent {
+            label 'ARM64'
+          }
+          steps {
+            withCredentials([
+              [
+                $class: 'UsernamePasswordMultiBinding',
+                credentialsId: '3f9ba4d5-100d-45b0-a3c4-633fd6061207',
+                usernameVariable: 'DOCKERUSER',
+                passwordVariable: 'DOCKERPASS'
+              ]
+            ]) {
+              echo 'Logging into DockerHub'
+              sh '''#! /bin/bash
+                 echo $DOCKERPASS | docker login -u $DOCKERUSER --password-stdin
+                 '''
+              sh "curl https://lsio-ci.ams3.digitaloceanspaces.com/qemu-aarch64-static -o qemu-aarch64-static"
+              sh "chmod +x qemu-*"
+              sh "docker build --no-cache -f Dockerfile.aarch64 -t ${IMAGE}:arm64v8-${META_TAG} \
+                           --build-arg ${BUILD_VERSION_ARG}=${EXT_RELEASE} --build-arg VERSION=\"${META_TAG}\" --build-arg BUILD_DATE=${GITHUB_DATE} ."
+              sh "docker tag ${IMAGE}:arm64v8-${META_TAG} lsiodev/buildcache:arm64v8-${COMMIT_SHA}-${BUILD_NUMBER}"
+              sh "docker push lsiodev/buildcache:arm64v8-${COMMIT_SHA}-${BUILD_NUMBER}"
+              sh '''docker rmi \
+                    ${IMAGE}:arm64v8-${META_TAG} \
+                    lsiodev/buildcache:arm64v8-${COMMIT_SHA}-${BUILD_NUMBER} '''
+            }
+          }
+        }
+      }
+    }
+    // Take the image we just built and dump package versions for comparison
+    stage('Update-packages') {
+      when {
+        branch "master"
+        environment name: 'CHANGE_ID', value: ''
+        environment name: 'EXIT_STATUS', value: ''
+      }
+      steps {
+        sh '''#! /bin/bash
+              set -e
+              TEMPDIR=$(mktemp -d)
+              if [ "${MULTIARCH}" == "true" ]; then
+                LOCAL_CONTAINER=${IMAGE}:amd64-${META_TAG}
+              else
+                LOCAL_CONTAINER=${IMAGE}:${META_TAG}
+              fi
+              if [ "${DIST_IMAGE}" == "alpine" ]; then
+                docker run --rm --entrypoint '/bin/sh' -v ${TEMPDIR}:/tmp ${LOCAL_CONTAINER} -c '\
+                  apk info > packages && \
+                  apk info -v > versions && \
+                  paste -d " " packages versions > /tmp/package_versions.txt && \
+                  chmod 777 /tmp/package_versions.txt'
+              elif [ "${DIST_IMAGE}" == "ubuntu" ]; then
+                docker run --rm --entrypoint '/bin/sh' -v ${TEMPDIR}:/tmp ${LOCAL_CONTAINER} -c '\
+                  apt list -qq --installed | cut -d" " -f1-2 > /tmp/package_versions.txt && \
+                  chmod 777 /tmp/package_versions.txt'
+              fi
+              NEW_PACKAGE_TAG=$(md5sum ${TEMPDIR}/package_versions.txt | cut -c1-8 )
+              echo "Package tag sha from current packages in buit container is ${NEW_PACKAGE_TAG} comparing to old ${PACKAGE_TAG} from github"
+              if [ "${NEW_PACKAGE_TAG}" != "${PACKAGE_TAG}" ]; then
+                git clone https://github.com/${LS_USER}/${LS_REPO}.git ${TEMPDIR}/${LS_REPO}
+                git --git-dir ${TEMPDIR}/${LS_REPO}/.git checkout -f master
+                cp ${TEMPDIR}/package_versions.txt ${TEMPDIR}/${LS_REPO}/
+                cd ${TEMPDIR}/${LS_REPO}/
+                wait
+                git add package_versions.txt
+                git commit -m 'Bot Updating Package Versions'
+                git push https://LinuxServer-CI:${GITHUB_TOKEN}@github.com/${LS_USER}/${LS_REPO}.git --all
+                echo "true" > /tmp/packages-${COMMIT_SHA}-${BUILD_NUMBER}
+                echo "Package tag updated, stopping build process"
+              else
+                echo "false" > /tmp/packages-${COMMIT_SHA}-${BUILD_NUMBER}
+                echo "Package tag is same as previous continue with build process"
+              fi
+              rm -Rf ${TEMPDIR}'''
+        script{
+          env.PACKAGE_UPDATED = sh(
+            script: '''cat /tmp/packages-${COMMIT_SHA}-${BUILD_NUMBER}''',
+            returnStdout: true).trim()
+        }
+      }
+    }
+    // Exit the build if the package file was just updated
+    stage('PACKAGE-exit') {
+      when {
+        branch "master"
+        environment name: 'CHANGE_ID', value: ''
+        environment name: 'PACKAGE_UPDATED', value: 'true'
+        environment name: 'EXIT_STATUS', value: ''
+      }
+      steps {
+        script{
+          env.EXIT_STATUS = 'ABORTED'
+        }
+      }
+    }
+    // Exit the build if this is just a package check and there are no changes to push
+    stage('PACKAGECHECK-exit') {
+      when {
+        branch "master"
+        environment name: 'CHANGE_ID', value: ''
+        environment name: 'PACKAGE_UPDATED', value: 'false'
+        environment name: 'EXIT_STATUS', value: ''
+        expression {
+          params.PACKAGE_CHECK == 'true'
+        }
+      }
+      steps {
+        script{
+          env.EXIT_STATUS = 'ABORTED'
+        }
+      }
+    }
+    /* #######
+       Testing
+       ####### */
+    // Run Container tests
+    stage('Test') {
+      when {
+        environment name: 'CI', value: 'true'
+        environment name: 'EXIT_STATUS', value: ''
+      }
+      steps {
+        withCredentials([
+          string(credentialsId: 'spaces-key', variable: 'DO_KEY'),
+          string(credentialsId: 'spaces-secret', variable: 'DO_SECRET')
+        ]) {
+          script{
+            env.CI_URL = 'https://lsio-ci.ams3.digitaloceanspaces.com/' + env.IMAGE + '/' + env.META_TAG + '/index.html'
+          }
+          sh '''#! /bin/bash
+                set -e
+                docker pull lsiodev/ci:latest
+                if [ "${MULTIARCH}" == "true" ]; then
+                  docker pull lsiodev/buildcache:arm32v6-${COMMIT_SHA}-${BUILD_NUMBER}
+                  docker pull lsiodev/buildcache:arm64v8-${COMMIT_SHA}-${BUILD_NUMBER}
+                  docker tag lsiodev/buildcache:arm32v6-${COMMIT_SHA}-${BUILD_NUMBER} ${IMAGE}:arm32v6-${META_TAG}
+                  docker tag lsiodev/buildcache:arm64v8-${COMMIT_SHA}-${BUILD_NUMBER} ${IMAGE}:arm64v8-${META_TAG}
+                fi
+                docker run --rm \
+                -v /var/run/docker.sock:/var/run/docker.sock \
+                -e IMAGE=\"${IMAGE}\" \
+                -e DELAY_START=\"${CI_DELAY}\" \
+                -e TAGS=\"${CI_TAGS}\" \
+                -e META_TAG=\"${META_TAG}\" \
+                -e PORT=\"${CI_PORT}\" \
+                -e SSL=\"${CI_SSL}\" \
+                -e BASE=\"${DIST_IMAGE}\" \
+                -e SECRET_KEY=\"${DO_SECRET}\" \
+                -e ACCESS_KEY=\"${DO_KEY}\" \
+                -e DOCKER_ENV=\"${CI_DOCKERENV}\" \
+                -e WEB_SCREENSHOT=\"${CI_WEB}\" \
+                -e WEB_AUTH=\"${CI_AUTH}\" \
+                -e WEB_PATH=\"${CI_WEBPATH}\" \
+                -e DO_REGION="ams3" \
+                -e DO_BUCKET="lsio-ci" \
+                -t lsiodev/ci:latest \
+                python /ci/ci.py'''
+        }
+      }
+    }
+    /* ##################
+         Release Logic
+       ################## */
+    // If this is an amd64 only image only push a single image
+    stage('Docker-Push-Single') {
+      when {
+        environment name: 'MULTIARCH', value: 'false'
+        environment name: 'EXIT_STATUS', value: ''
+      }
+      steps {
+        withCredentials([
+          [
+            $class: 'UsernamePasswordMultiBinding',
+            credentialsId: '3f9ba4d5-100d-45b0-a3c4-633fd6061207',
+            usernameVariable: 'DOCKERUSER',
+            passwordVariable: 'DOCKERPASS'
+          ]
+        ]) {
+          echo 'Logging into DockerHub'
+          sh '''#! /bin/bash
+             echo $DOCKERPASS | docker login -u $DOCKERUSER --password-stdin
+             '''
+          sh "docker tag ${IMAGE}:${META_TAG} ${IMAGE}:latest"
+          sh "docker push ${IMAGE}:latest"
+          sh "docker push ${IMAGE}:${META_TAG}"
+          sh '''docker rmi \
+                ${IMAGE}:${META_TAG} \
+                ${IMAGE}:latest '''
+                
+        }
+      }
+    }
+    // If this is a multi arch release push all images and define the manifest
+    stage('Docker-Push-Multi') {
+      when {
+        environment name: 'MULTIARCH', value: 'true'
+        environment name: 'EXIT_STATUS', value: ''
+      }
+      steps {
+        withCredentials([
+          [
+            $class: 'UsernamePasswordMultiBinding',
+            credentialsId: '3f9ba4d5-100d-45b0-a3c4-633fd6061207',
+            usernameVariable: 'DOCKERUSER',
+            passwordVariable: 'DOCKERPASS'
+          ]
+        ]) {
+          sh '''#! /bin/bash
+             echo $DOCKERPASS | docker login -u $DOCKERUSER --password-stdin
+             '''
+          sh '''#! /bin/bash
+                if [ "${CI}" == "false" ]; then
+                  docker pull lsiodev/buildcache:arm32v6-${COMMIT_SHA}-${BUILD_NUMBER}
+                  docker pull lsiodev/buildcache:arm64v8-${COMMIT_SHA}-${BUILD_NUMBER}
+                  docker tag lsiodev/buildcache:arm32v6-${COMMIT_SHA}-${BUILD_NUMBER} ${IMAGE}:arm32v6-${META_TAG}
+                  docker tag lsiodev/buildcache:arm64v8-${COMMIT_SHA}-${BUILD_NUMBER} ${IMAGE}:arm64v8-${META_TAG}
+                fi'''
+          sh "docker tag ${IMAGE}:amd64-${META_TAG} ${IMAGE}:amd64-latest"
+          sh "docker tag ${IMAGE}:arm32v6-${META_TAG} ${IMAGE}:arm32v6-latest"
+          sh "docker tag ${IMAGE}:arm64v8-${META_TAG} ${IMAGE}:arm64v8-latest"
+          sh "docker push ${IMAGE}:amd64-${META_TAG}"
+          sh "docker push ${IMAGE}:arm32v6-${META_TAG}"
+          sh "docker push ${IMAGE}:arm64v8-${META_TAG}"
+          sh "docker push ${IMAGE}:amd64-latest"
+          sh "docker push ${IMAGE}:arm32v6-latest"
+          sh "docker push ${IMAGE}:arm64v8-latest"
+          sh "docker manifest push --purge ${IMAGE}:latest || :"
+          sh "docker manifest create ${IMAGE}:latest ${IMAGE}:amd64-latest ${IMAGE}:arm32v6-latest ${IMAGE}:arm64v8-latest"
+          sh "docker manifest annotate ${IMAGE}:latest ${IMAGE}:arm32v6-latest --os linux --arch arm"
+          sh "docker manifest annotate ${IMAGE}:latest ${IMAGE}:arm64v8-latest --os linux --arch arm64 --variant v8"
+          sh "docker manifest push --purge ${IMAGE}:${META_TAG} || :"
+          sh "docker manifest create ${IMAGE}:${META_TAG} ${IMAGE}:amd64-${META_TAG} ${IMAGE}:arm32v6-${META_TAG} ${IMAGE}:arm64v8-${META_TAG}"
+          sh "docker manifest annotate ${IMAGE}:${META_TAG} ${IMAGE}:arm32v6-${META_TAG} --os linux --arch arm"
+          sh "docker manifest annotate ${IMAGE}:${META_TAG} ${IMAGE}:arm64v8-${META_TAG} --os linux --arch arm64 --variant v8"
+          sh "docker manifest push --purge ${IMAGE}:latest"
+          sh "docker manifest push --purge ${IMAGE}:${META_TAG}"
+          sh '''docker rmi \
+                ${IMAGE}:amd64-${META_TAG} \
+                ${IMAGE}:amd64-latest \
+                ${IMAGE}:arm32v6-${META_TAG} \
+                ${IMAGE}:arm32v6-latest \
+                ${IMAGE}:arm64v8-${META_TAG} \
+                ${IMAGE}:arm64v8-latest \
+                lsiodev/buildcache:arm32v6-${COMMIT_SHA}-${BUILD_NUMBER} \
+                lsiodev/buildcache:arm64v8-${COMMIT_SHA}-${BUILD_NUMBER} '''
+        }
+      }
+    }
+    // If this is a public release tag it in the LS Github
+    stage('Github-Tag-Push-Release') {
+      when {
+        branch "master"
+        expression {
+          env.LS_RELEASE != env.EXT_RELEASE_CLEAN + '-pkg-' + env.PACKAGE_TAG + '-ls' + env.LS_TAG_NUMBER
+        }
+        environment name: 'CHANGE_ID', value: ''
+        environment name: 'EXIT_STATUS', value: ''
+      }
+      steps {
+        echo "Pushing New tag for current commit ${EXT_RELEASE_CLEAN}-pkg-${PACKAGE_TAG}-ls${LS_TAG_NUMBER}"
+        sh '''curl -H "Authorization: token ${GITHUB_TOKEN}" -X POST https://api.github.com/repos/${LS_USER}/${LS_REPO}/git/tags \
+        -d '{"tag":"'${EXT_RELEASE_CLEAN}'-pkg-'${PACKAGE_TAG}'-ls'${LS_TAG_NUMBER}'",\
+             "object": "'${COMMIT_SHA}'",\
+             "message": "Tagging Release '${EXT_RELEASE_CLEAN}'-pkg-'${PACKAGE_TAG}'-ls'${LS_TAG_NUMBER}' to master",\
+             "type": "commit",\
+             "tagger": {"name": "LinuxServer Jenkins","email": "jenkins@linuxserver.io","date": "'${GITHUB_DATE}'"}}' '''
+        echo "Pushing New release for Tag"
+        sh '''#! /bin/bash
+              echo "Updating base packages to ${PACKAGE_TAG}" > releasebody.json
+              echo '{"tag_name":"'${EXT_RELEASE_CLEAN}'-pkg-'${PACKAGE_TAG}'-ls'${LS_TAG_NUMBER}'",\
+                     "target_commitish": "master",\
+                     "name": "'${EXT_RELEASE_CLEAN}'-pkg-'${PACKAGE_TAG}'-ls'${LS_TAG_NUMBER}'",\
+                     "body": "**LinuxServer Changes:**\\n\\n'${LS_RELEASE_NOTES}'\\n**OS Changes:**\\n\\n' > start
+              printf '","draft": false,"prerelease": false}' >> releasebody.json
+              paste -d'\\0' start releasebody.json > releasebody.json.done
+              curl -H "Authorization: token ${GITHUB_TOKEN}" -X POST https://api.github.com/repos/${LS_USER}/${LS_REPO}/releases -d @releasebody.json.done'''
+      }
+    }
+    // Use helper container to sync the current README on master to the dockerhub endpoint
+    stage('Sync-README') {
+      when {
+        environment name: 'CHANGE_ID', value: ''
+        environment name: 'EXIT_STATUS', value: ''
+      }
+      steps {
+        withCredentials([
+          [
+            $class: 'UsernamePasswordMultiBinding',
+            credentialsId: '3f9ba4d5-100d-45b0-a3c4-633fd6061207',
+            usernameVariable: 'DOCKERUSER',
+            passwordVariable: 'DOCKERPASS'
+          ]
+        ]) {
+          sh '''#! /bin/bash
+                docker pull lsiodev/readme-sync
+                docker run --rm=true \
+                  -e DOCKERHUB_USERNAME=$DOCKERUSER \
+                  -e DOCKERHUB_PASSWORD=$DOCKERPASS \
+                  -e GIT_REPOSITORY=${LS_USER}/${LS_REPO} \
+                  -e DOCKER_REPOSITORY=${IMAGE} \
+                  -e GIT_BRANCH=master \
+                  lsiodev/readme-sync bash -c 'node sync' '''
+        }
+      }
+    }
+    // If this is a Pull request send the CI link as a comment on it
+    stage('Pull Request Comment') {
+      when {
+        not {environment name: 'CHANGE_ID', value: ''}
+        environment name: 'CI', value: 'true'
+        environment name: 'EXIT_STATUS', value: ''
+      }
+      steps {
+        sh '''curl -H "Authorization: token ${GITHUB_TOKEN}" -X POST https://api.github.com/repos/${LS_USER}/${LS_REPO}/issues/${PULL_REQUEST}/comments \
+        -d '{"body": "I am a bot, here are the test results for this PR '${CI_URL}'"}' '''
+      }
+    }
+  }
+  /* ######################
+     Send status to Discord
+     ###################### */
+  post {
+    always {
+      script{
+        if (env.EXIT_STATUS == "ABORTED"){
+          sh 'echo "build aborted"'
+        }
+        else if (currentBuild.currentResult == "SUCCESS"){
+          sh ''' curl -X POST --data '{"avatar_url": "https://wiki.jenkins-ci.org/download/attachments/2916393/headshot.png","embeds": [{"color": 1681177,\
+                 "description": "**Build:**  '${BUILD_NUMBER}'\\n**CI Results:**  '${CI_URL}'\\n**Status:**  Success\\n**Job:** '${RUN_DISPLAY_URL}'\\n**Change:** '${CODE_URL}'\\n**External Release:**: '${RELEASE_LINK}'\\n**DockerHub:** '${DOCKERHUB_LINK}'\\n"}],\
+                 "username": "Jenkins"}' ${BUILDS_DISCORD} '''
+        }
+        else {
+          sh ''' curl -X POST --data '{"avatar_url": "https://wiki.jenkins-ci.org/download/attachments/2916393/headshot.png","embeds": [{"color": 16711680,\
+                 "description": "**Build:**  '${BUILD_NUMBER}'\\n**CI Results:**  '${CI_URL}'\\n**Status:**  failure\\n**Job:** '${RUN_DISPLAY_URL}'\\n**Change:** '${CODE_URL}'\\n**External Release:**: '${RELEASE_LINK}'\\n**DockerHub:** '${DOCKERHUB_LINK}'\\n"}],\
+                 "username": "Jenkins"}' ${BUILDS_DISCORD} '''
+        }
+      }
+    }
+  }
+}

README.md

@@ -1,59 +1,73 @@
-[linuxserverurl]: https://linuxserver.io
-[forumurl]: https://forum.linuxserver.io
-[ircurl]: https://www.linuxserver.io/irc/
-[podcasturl]: https://www.linuxserver.io/podcast/
-[appurl]: http://www.streamboard.tv/oscam/
-[hub]: https://hub.docker.com/r/linuxserver/oscam/
+[![linuxserver.io](https://raw.githubusercontent.com/linuxserver/docker-templates/master/linuxserver.io/img/linuxserver_medium.png)](https://linuxserver.io)
 
-[![linuxserver.io](https://raw.githubusercontent.com/linuxserver/docker-templates/master/linuxserver.io/img/linuxserver_medium.png)][linuxserverurl]
+The [LinuxServer.io](https://linuxserver.io) team brings you another container release featuring :-
 
-The [LinuxServer.io][linuxserverurl] team brings you another container release featuring easy user mapping and community support. Find us for support at:
-* [forum.linuxserver.io][forumurl]
-* [IRC][ircurl] on freenode at `#linuxserver.io`
-* [Podcast][podcasturl] covers everything to do with getting the most from your Linux Server plus a focus on all things Docker and containerisation!
+ * regular and timely application updates
+ * easy user mappings (PGID, PUID)
+ * custom base image with s6 overlay
+ * weekly base OS updates with common layers across the entire LinuxServer.io ecosystem to minimise space usage, down time and bandwidth
+ * regular security updates
 
-# linuxserver/oscam
-[![](https://images.microbadger.com/badges/version/linuxserver/oscam.svg)](https://microbadger.com/images/linuxserver/oscam "Get your own version badge on microbadger.com")[![](https://images.microbadger.com/badges/image/linuxserver/oscam.svg)](https://microbadger.com/images/linuxserver/oscam "Get your own image badge on microbadger.com")[![Docker Pulls](https://img.shields.io/docker/pulls/linuxserver/oscam.svg)][hub][![Docker Stars](https://img.shields.io/docker/stars/linuxserver/oscam.svg)][hub][![Build Status](https://ci.linuxserver.io/buildStatus/icon?job=Docker-Builders/x86-64/x86-64-oscam)](https://ci.linuxserver.io/job/Docker-Builders/job/x86-64/job/x86-64-oscam/)
+Find us at:
+* [Discord](https://discord.gg/YWrKVTn) - realtime support / chat with the community and the team.
+* [IRC](https://irc.linuxserver.io) - on freenode at `#linuxserver.io`. Our primary support channel is Discord.
+* [Blog](https://blog.linuxserver.io) - all the things you can do with our containers including How-To guides, opinions and much more!
+* [Podcast](https://anchor.fm/linuxserverio) - on hiatus. Coming back soon (late 2018).
 
-[Oscam][appurl] is an Open Source Conditional Access Module software used for descrambling DVB transmissions using smart cards. It's both a server and a client.
+# [linuxserver/oscam](https://github.com/linuxserver/docker-oscam)
+[![](https://img.shields.io/discord/354974912613449730.svg?logo=discord&label=LSIO%20Discord&style=flat-square)](https://discord.gg/YWrKVTn)
+[![](https://images.microbadger.com/badges/version/linuxserver/oscam.svg)](https://microbadger.com/images/linuxserver/oscam "Get your own version badge on microbadger.com")
+[![](https://images.microbadger.com/badges/image/linuxserver/oscam.svg)](https://microbadger.com/images/linuxserver/oscam "Get your own version badge on microbadger.com")
+![Docker Pulls](https://img.shields.io/docker/pulls/linuxserver/oscam.svg)
+![Docker Stars](https://img.shields.io/docker/stars/linuxserver/oscam.svg)
+[![Build Status](https://ci.linuxserver.io/buildStatus/icon?job=Docker-Pipeline-Builders/docker-oscam/master)](https://ci.linuxserver.io/job/Docker-Pipeline-Builders/job/docker-oscam/job/master/)
+[![](https://lsio-ci.ams3.digitaloceanspaces.com/linuxserver/oscam/latest/badge.svg)](https://lsio-ci.ams3.digitaloceanspaces.com/linuxserver/oscam/latest/index.html)
+
+[Oscam](http://www.streamboard.tv/oscam/) is an Open Source Conditional Access Module software used for descrambling DVB transmissions using smart cards. It's both a server and a client.
+
+[![oscam](http://download.oscam.cc/images/Logo.png)](http://www.streamboard.tv/oscam/)
+
+## Supported Architectures
+
+Our images support multiple architectures such as `x86-64`, `arm64` and `armhf`. We utilise the docker manifest for multi-platform awareness. More information is available from docker [here](https://github.com/docker/distribution/blob/master/docs/spec/manifest-v2-2.md#manifest-list) and our announcement [here](https://blog.linuxserver.io/2019/02/21/the-lsio-pipeline-project/). 
+
+Simply pulling `linuxserver/oscam` should retrieve the correct image for your arch, but you can also pull specific arch images via tags.
+
+The architectures supported by this image are:
+
+| Architecture | Tag |
+| :----: | --- |
+| x86-64 | amd64-latest |
+| arm64 | arm64v8-latest |
+| armhf | arm32v6-latest |
 
-[![oscam](http://download.oscam.cc/images/Logo.png)][appurl]
 
 ## Usage
 
+Here are some example snippets to help you get started creating a container.
+
+### docker
+
 ```
 docker create \
   --name=oscam \
-  -v <path to data>:/config \
-  -e PGID=<gid> -e PUID=<uid>  \
+  -e PUID=1000 \
+  -e PGID=1000 \
+  -e TZ=Europe/London \
   -p 8888:8888 \
-  --device=/dev/ttyUSB0 \
+  -v <path to data>:/config \
+  --device /dev/ttyUSB0:/dev/ttyUSB0 \
+  --restart unless-stopped \
   linuxserver/oscam
 ```
 
-## Parameters
-
-`The parameters are split into two halves, separated by a colon, the left hand side representing the host and the right the container side. 
-For example with a port -p external:internal - what this shows is the port mapping from internal to external of the container.
-So -p 8080:80 would expose port 80 from inside the container to be accessible from the host's IP on port 8080
-http://192.168.x.x:8080 would show you what's running INSIDE the container on port 80.`
-
-
-* `-p 8888` - the port(s)
-* `-v /config` - where oscam should store config files and logs
-* `-e PGID` for GroupID - see below for explanation
-* `-e PUID` for UserID - see below for explanation
-* `--device=/dev/ttyUSB0` - for passing through smart card readers
-
-It is based on alpine linux with s6 overlay, for shell access whilst the container is running do `docker exec -it oscam /bin/bash`.
-
 ### Passing through Smart Card Readers
 
-If you want to pass through a smart card reader, you need to specify the reader with the `--device=` tag. The method used depends on how the reader is recognized. 
+If you want to pass through a smart card reader, you need to specify the reader with the `--device=` tag. The method used depends on how the reader is recognized.
 The first is /dev/ttyUSBX. To find the correct device, connect the reader and run `dmesg | tail` on the host. In the output you will find /dev/ttyUSBX, where X is the number of the device. If this is the first reader you connect to your host, it will be /dev/ttyUSB0. If you add one more it will be /dev/ttyUSB1.
 
 If there are no /dev/ttyUSBX device in `dmesg | tail`, you have to use the USB bus path. It will look similar to the below.
- 
+
 `/dev/bus/usb/001/001`
 
 The important parts are the two numbers in the end. The first one is the Bus number, the second is the Device number. To find the Bus and Device number you have to run `lsusb` on the host, then find your USB device in the list and note the Bus and Device numbers.
@@ -68,43 +82,114 @@ The first number, the Bus, is 002. The second number, the Device, is 005. This w
 
 If you have multiple smart card readers, you add one `--device=` tag for each reader.
 
-### User / Group Identifiers
 
-Sometimes when using data volumes (`-v` flags) permissions issues can arise between the host OS and the container. We avoid this issue by allowing you to specify the user `PUID` and group `PGID`. Ensure the data volume directory on the host is owned by the same user you specify and it will "just work" ™.
+### docker-compose
 
-In this instance `PUID=1001` and `PGID=1001`. To find yours use `id user` as below:
+Compatible with docker-compose v2 schemas.
 
 ```
-  $ id <dockeruser>
-    uid=1001(dockeruser) gid=1001(dockergroup) groups=1001(dockergroup)
+---
+version: "2"
+services:
+  oscam:
+    image: linuxserver/oscam
+    container_name: oscam
+    environment:
+      - PUID=1000
+      - PGID=1000
+      - TZ=Europe/London
+    volumes:
+      - <path to data>:/config
+    ports:
+      - 8888:8888
+    devices:
+      - /dev/ttyUSB0:/dev/ttyUSB0
+    restart: unless-stopped
 ```
 
-## Setting up the application
+## Parameters
+
+Container images are configured using parameters passed at runtime (such as those above). These parameters are separated by a colon and indicate `<external>:<internal>` respectively. For example, `-p 8080:80` would expose port `80` from inside the container to be accessible from the host's IP on port `8080` outside the container.
+
+| Parameter | Function |
+| :----: | --- |
+| `-p 8888` | WebUI |
+| `-e PUID=1000` | for UserID - see below for explanation |
+| `-e PGID=1000` | for GroupID - see below for explanation |
+| `-e TZ=Europe/London` | Specify a timezone to use EG Europe/London. |
+| `-v /config` | Where oscam should store config files and logs. |
+| `--device /dev/ttyUSB0` | For passing through smart card readers. |
+
+## User / Group Identifiers
+
+When using volumes (`-v` flags) permissions issues can arise between the host OS and the container, we avoid this issue by allowing you to specify the user `PUID` and group `PGID`.
+
+Ensure any volume directories on the host are owned by the same user you specify and any permissions issues will vanish like magic.
+
+In this instance `PUID=1000` and `PGID=1000`, to find yours use `id user` as below:
+
+```
+  $ id username
+    uid=1000(dockeruser) gid=1000(dockergroup) groups=1000(dockergroup)
+```
+
+
+&nbsp;
+## Application Setup
 
 To set up oscam there are numerous guides on the internet. There are too many scenarios to make a quick guide.
 The web interface is at port 8888.
 
 
-## Info
+
+## Support Info
 
 * Shell access whilst the container is running: `docker exec -it oscam /bin/bash`
 * To monitor the logs of the container in realtime: `docker logs -f oscam`
-
 * container version number 
-
-`docker inspect -f '{{ index .Config.Labels "build_version" }}' oscam`
-
+  * `docker inspect -f '{{ index .Config.Labels "build_version" }}' oscam`
 * image version number
+  * `docker inspect -f '{{ index .Config.Labels "build_version" }}' linuxserver/oscam`
 
-`docker inspect -f '{{ index .Config.Labels "build_version" }}' linuxserver/oscam`
+## Updating Info
+
+Most of our images are static, versioned, and require an image update and container recreation to update the app inside. With some exceptions (ie. nextcloud, plex), we do not recommend or support updating apps inside the container. Please consult the [Application Setup](#application-setup) section above to see if it is recommended for the image.  
+  
+Below are the instructions for updating containers:  
+  
+### Via Docker Run/Create
+* Update the image: `docker pull linuxserver/oscam`
+* Stop the running container: `docker stop oscam`
+* Delete the container: `docker rm oscam`
+* Recreate a new container with the same docker create parameters as instructed above (if mapped correctly to a host folder, your `/config` folder and settings will be preserved)
+* Start the new container: `docker start oscam`
+* You can also remove the old dangling images: `docker image prune`
+
+### Via Taisun auto-updater (especially useful if you don't remember the original parameters)
+* Pull the latest image at its tag and replace it with the same env variables in one shot:
+  ```
+  docker run --rm \
+  -v /var/run/docker.sock:/var/run/docker.sock taisun/updater \
+  --oneshot oscam
+  ```
+* You can also remove the old dangling images: `docker image prune`
+
+### Via Docker Compose
+* Update all images: `docker-compose pull`
+  * or update a single image: `docker-compose pull oscam`
+* Let compose update all containers as necessary: `docker-compose up -d`
+  * or update a single container: `docker-compose up -d oscam`
+* You can also remove the old dangling images: `docker image prune`
 
 ## Versions
 
-+ **13.12.17:** Rebase to alpine 3.7.
-+ **19.10.17:** Add ccid package for usb card readers.
-+ **17.10.17:** Switch to using bzr for source code, streamboard awol.
-+ **28.05.17:** Rebase to alpine 3.6.
-+ **09.02.17:** Rebase to alpine 3.5.
-+ **14.10.16:** Add version layer information.
-+ **02.10.16:** Add info on passing through devices to README.
-+ **25.09.16:** Initial release.
+* **19.02.19:** - Add pipeline logic and multi arch, rebase to Alpine 3.8.
+* **03.01.18:** - Deprecate cpu_core routine lack of scaling.
+* **13.12.17:** - Rebase to alpine 3.7.
+* **19.10.17:** - Add ccid package for usb card readers.
+* **17.10.17:** - Switch to using bzr for source code, streamboard awol.
+* **28.05.17:** - Rebase to alpine 3.6.
+* **09.02.17:** - Rebase to alpine 3.5.
+* **14.10.16:** - Add version layer information.
+* **02.10.16:** - Add info on passing through devices to README.
+* **25.09.16:** - Initial release.

jenkins-vars.yml

@@ -0,0 +1,26 @@
+---
+
+# jenkins variables
+project_name: docker-oscam
+external_type: os
+release_type: stable
+release_tag: latest
+ls_branch: master
+repo_vars:
+  - BUILD_VERSION_ARG = 'OSCAM_VERSION'
+  - LS_USER = 'linuxserver'
+  - LS_REPO = 'docker-oscam'
+  - CONTAINER_NAME = 'oscam'
+  - DOCKERHUB_IMAGE = 'linuxserver/oscam'
+  - DEV_DOCKERHUB_IMAGE = 'lsiodev/oscam'
+  - PR_DOCKERHUB_IMAGE = 'lspipepr/oscam'
+  - DIST_IMAGE = 'alpine'
+  - MULTIARCH='true'
+  - CI='true'
+  - CI_WEB='true'
+  - CI_PORT='8888'
+  - CI_SSL='false'
+  - CI_DELAY='120'
+  - CI_DOCKERENV='TZ=US/Pacific'
+  - CI_AUTH='user:password'
+  - CI_WEBPATH=''

package_versions.txt

@@ -0,0 +1,34 @@
+musl musl-1.1.19-r10
+busybox busybox-1.28.4-r3
+alpine-baselayout alpine-baselayout-3.1.0-r0
+alpine-keys alpine-keys-2.1-r1
+libressl2.7-libcrypto libressl2.7-libcrypto-2.7.5-r0
+libressl2.7-libssl libressl2.7-libssl-2.7.5-r0
+libressl2.7-libtls libressl2.7-libtls-2.7.5-r0
+ssl_client ssl_client-1.28.4-r3
+zlib zlib-1.2.11-r1
+apk-tools apk-tools-2.10.1-r0
+scanelf scanelf-1.2.3-r0
+musl-utils musl-utils-1.1.19-r10
+libc-utils libc-utils-0.7.1-r0
+xz-libs xz-libs-5.2.4-r0
+xz xz-5.2.4-r0
+ca-certificates ca-certificates-20171114-r3
+ncurses-terminfo-base ncurses-terminfo-base-6.1_p20180818-r1
+ncurses-terminfo ncurses-terminfo-6.1_p20180818-r1
+ncurses-libs ncurses-libs-6.1_p20180818-r1
+readline readline-7.0.003-r0
+bash bash-4.4.19-r1
+libattr libattr-2.4.47-r7
+libacl libacl-2.2.52-r5
+coreutils coreutils-8.29-r2
+linux-pam linux-pam-1.3.0-r0
+shadow shadow-4.5-r0
+tzdata tzdata-2018f-r0
+libusb libusb-1.0.22-r0
+eudev-libs eudev-libs-3.2.5-r2
+pcsc-lite-libs pcsc-lite-libs-1.8.23-r1
+pcsc-lite pcsc-lite-1.8.23-r1
+ccid ccid-1.4.29-r0
+libcrypto1.0 libcrypto1.0-1.0.2r-r0
+libssl1.0 libssl1.0-1.0.2r-r0

readme-vars.yml

@@ -0,0 +1,85 @@
+---
+
+# project information
+project_name: oscam
+project_url: "http://www.streamboard.tv/oscam/"
+project_logo: "http://download.oscam.cc/images/Logo.png"
+project_blurb: "[{{ project_name|capitalize }}]({{ project_url }}) is an Open Source Conditional Access Module software used for descrambling DVB transmissions using smart cards. It's both a server and a client."
+project_lsio_github_repo_url: "https://github.com/linuxserver/docker-{{ project_name }}"
+project_blurb_optional_extras_enabled: false
+
+# supported architectures
+available_architectures:
+  - { arch: "{{ arch_x86_64 }}", tag: "amd64-latest"}
+  - { arch: "{{ arch_arm64 }}", tag: "arm64v8-latest"}
+  - { arch: "{{ arch_armhf }}", tag: "arm32v6-latest"}
+
+# development version
+development_versions: false
+
+# container parameters
+common_param_env_vars_enabled: true
+param_container_name: "{{ project_name }}"
+param_usage_include_net: false
+param_usage_include_env: true
+param_env_vars:
+  - { env_var: "TZ", env_value: "Europe/London", desc: "Specify a timezone to use EG Europe/London." }
+param_usage_include_vols: true
+param_volumes:
+  - { vol_path: "/config", vol_host_path: "<path to data>", desc: "Where oscam should store config files and logs." }
+param_usage_include_ports: true
+param_ports:
+  - { external_port: "8888", internal_port: "8888", port_desc: "WebUI" }
+param_device_map: true
+param_devices:
+  - { device_path: "/dev/ttyUSB0", device_host_path: "/dev/ttyUSB0", desc: "For passing through smart card readers." }
+cap_add_param: false
+
+# optional container parameters
+opt_param_usage_include_env: false
+opt_param_usage_include_vols: false
+opt_param_usage_include_ports: false
+opt_param_device_map: false
+opt_cap_add_param: false
+optional_block_1: true
+optional_block_1_items:
+  - |
+    ### Passing through Smart Card Readers
+
+    If you want to pass through a smart card reader, you need to specify the reader with the `--device=` tag. The method used depends on how the reader is recognized.
+    The first is /dev/ttyUSBX. To find the correct device, connect the reader and run `dmesg | tail` on the host. In the output you will find /dev/ttyUSBX, where X is the number of the device. If this is the first reader you connect to your host, it will be /dev/ttyUSB0. If you add one more it will be /dev/ttyUSB1.
+
+    If there are no /dev/ttyUSBX device in `dmesg | tail`, you have to use the USB bus path. It will look similar to the below.
+
+    `/dev/bus/usb/001/001`
+
+    The important parts are the two numbers in the end. The first one is the Bus number, the second is the Device number. To find the Bus and Device number you have to run `lsusb` on the host, then find your USB device in the list and note the Bus and Device numbers.
+
+    Here is an example of how to find the Bus and Device. The output of the lsusb command is below.
+
+    `Bus 002 Device 005: ID 076b:6622 OmniKey AG CardMan 6121`
+
+    The first number, the Bus, is 002. The second number, the Device, is 005. This will look like below in the `--device=` tag.
+
+    `--device=/dev/bus/usb/002/005`
+
+    If you have multiple smart card readers, you add one `--device=` tag for each reader.
+
+# application setup block
+app_setup_block_enabled: true
+app_setup_block: |
+  To set up oscam there are numerous guides on the internet. There are too many scenarios to make a quick guide.
+  The web interface is at port 8888.
+
+# changelog
+changelogs:
+  - { date: "19.02.19:", desc: "Add pipeline logic and multi arch, rebase to Alpine 3.8." }
+  - { date: "03.01.18:", desc: "Deprecate cpu_core routine lack of scaling." }
+  - { date: "13.12.17:", desc: "Rebase to alpine 3.7." }
+  - { date: "19.10.17:", desc: "Add ccid package for usb card readers." }
+  - { date: "17.10.17:", desc: "Switch to using bzr for source code, streamboard awol." }
+  - { date: "28.05.17:", desc: "Rebase to alpine 3.6." }
+  - { date: "09.02.17:", desc: "Rebase to alpine 3.5." }
+  - { date: "14.10.16:", desc: "Add version layer information." }
+  - { date: "02.10.16:", desc: "Add info on passing through devices to README." }
+  - { date: "25.09.16:", desc: "Initial release." }